100-160 A busbarIP40/55

GENERAL DATA

Realized in conformity to the CEI EN 60439/2 standards with copper conductors appropriately supported by insulators in plastic and self-extinguishing material; the sheet casing made of hot-galvanized steel sheet, according to the EN 10142 standard, is the protection conductor (PE) and it guarantees a fair protection at the mechanical loads.
The degree of protection is IP 40 in conformity with the standards CEI EN 60529 raisable to IP 55 with some special joint cover and some plug point gasket fitted out of antiaging gasket garanting the inalterability of the seat.
The bar duct has to be completed with the various accessories of assembly and with the suspension bracket.

Straight lenghts, as the above mentioned features with plug-in outlet every 1000 mm. on both sides.
In those ducts, the mechanical junction, unconnected from the electrical junction, guarantees the continuity of the protection conductor.
To install vertical elements we can supply you with trust unit elements to allow the installation of rising main higher than 20 mt.
The expansion joint elements are not necessary for MS line as they are equipped with a particular junction.
The fire barrier elements are used when you pass through fire resisting walls.
End feed unit, is complete by the cable press and the clamps for cables of 70 mm2.
End cover, are fitted to the last element of the run to maintain the degree of protection (IP40 or IP55).
Tap-off box, completed by clamps suitable for cables up to 50 mm2; the body in self-extinguishing plastic material grants the good mechanical resistance and to the creeping current.
The Tap-off boxes can be inserted and disconnected easily when they are alive; ratings 16 A - 50 A - 63 A.
The opening of the tap-off box╣s
cover has also the important function to section the load.